63
Installation and Maintenance
Service Manual
a
motor support
nut
4. Remove fan motor
5. Remove electric box
Remove the nut fixing the blade and then remove the
axial flow blade.
b Remove the 4 tapping screws fixing the motor;
disconnect the leading wire insert of the motor and
then remove the motor.
Remove the 2 tapping screws fixing the motor
support and then pull the motor support upwards to r
emove it.
Remove the screws fixing the electric box sub-assy;
loosen the wire bundle; pull out the wiring terminals
and then pull the electric box upwards to remove it.
axial flow blade
electric box
motor
To Next Page
Loading...
