59
Installation and Maintenance
Service Manual
Procedure
Step
Nut
Remove the nut xing axial ow blade and
then remove the axial
blade.
9. Remove axial
blade
Axial
blade
7. Remove protective grille
8. Remove electric box assy
Cut off the wire binder fixing the protective
grille and then remove the protective grille.
Protective grille
Remove the wiring terminals on electric box.
assy and then remove the electric box assy.
compressor
capacitor.
Then remove the compressor capacitor.
Electric box assy
Screw1
Compressor
capacitor
Wiring
terminal
Screw
To Next Page
Loading...