112
Installation and Maintenance
Service Manual
8. Remov e4-w ay valv e assy
Discharge the refrigerant completely;unsolder
the pipelines connecting the compressor and
the condenser assy,and then remove the 4-way
valve assy.
Remove the 3 foot nuts fixing the compressor
and then remove the compressor.
Remove the screws connecting the support
(condenser) and condenser assy,and then
remove the support(condenser).
9. Remov e c ompressor
compressor
4-way valve assy
10.Remove condenser sub-assy
a
support
Electronic
expansion valve
To Next Page
Loading...