76
Installation and Maintenance
Service Manual
Steps
Procedure
Points
3. Opening and shutting front panel
Support the front panel by one
hand, while remove the rotation
axis at the upper center by the
other hand.
■
Draw out the axial bush.
Bend the horizontal louver
slightly and then remove it.
a
Left and right lters are
interchangeable.
■
To re-install, insert air lter
along the guide.
■
Hook a nger onto the
projection part provided
on the both sides of the
units panel and open
up the panel to the
position higher than it
will stop.
b
Remove the front panel
from the unit.
c
Guide Louver
axial bush
Front pane
To Next Page
Loading...
