Gree KFR-25 - SLEEP Mode Operation Procedure

When the unit is cooling or drying,if SLEEP operation is set,SET TEMP.would incr-
ease 1 in 1 hour and 2 in 2 hours.
When the unit is heating,if SLEEP operation is set,SET TEMP.would decrease 1
in 1 hour and 2 in 2 hours.
Under SWITCH C mode,press H-UP or H-DN button when SLEEP mode is started,
timer-off time can be adjusted from 1 to 7 hour.
SLEEPmodeoperationprocedure
1.Plug in,press ON/OFF
button,and then air condi-
-tioner is turned on.
4.Press FAN button,set fan
speed.
5.Press TEMP button,set
suitable SET TEMP.
2.Press MODE button,set
COOL DRY or HEAT
6
.SLEEP button Press it to
set SLEEP operation.
operation mode.
3.Press SWING button,the
louvers start to rotate auto-
matically,and stop when
repress again.
12
REMOTE CONTROL OPERATION PROCEDURE