Explanation of Symbols
Exception Clauses
Indicates a hazardous situation that, if not avoided, will
Manufacturer will bear no responsibilities when personal injury or
1.Damage the product due to improper use or misuse of the product;
2.Alteration, failure to properly maintain or using the product with other equipment
without adhering to the instruction manual of manufacturer;
3.After verification, the defect of product is directly caused by corrosive gas;
4.After verification, defects are due to improperly securing product during
transporting;
5.Operating, repairing or performing maintenance to the unit without following the
instruction manual or related regulations;
6.After verification, the problem or dispute is caused by the quality specification or
performance of parts and components produced by other manufacturers;
7.The damage is caused by natural external forces [such as using in a corrosive
environment, or force majeure.
property loss is caused by the following reasons.
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, may
result in minor or moderate injury.
Indicates important but not hazard-related information,
used to indicate risk of property damage.
Indicates a hazard that would be assigned a signal word
WARNING or CAUTION.
DANGER
WARNING
CAUTION
NOTICE
To Next Page
Loading...
