22
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
(2) LSQWRF60VM/NhA-M
running indicating
error indicating
External passive contact switch
Note: the output control lines of the AC contactors for the auxiliary electric heater 1, auxiliary electric
heater 2 can be wired to the corresponding wiring board of all units, while those for the error indicator and
external passive contact switch should be wired to the corresponding wiring board of all units.
Unit
Unit 2
Unit
When one auxiliary electric heater serves more than one modules, its wiring terminals
12 and 13 are connected to terminals G and H respectively of an AC contactor marked
12 13 12 13 12 13 12 13
G
H
KM3
12
When multiple modules have direct control over one auxiliary electric heater, its A
contactor is wired to an AC contactor (KM3 or KM4) of any one module.
13
KM3
Unit
~