28
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
(4) The remote switch control signal is available for the electric box and please pay attention to the
input passive dry contact.
(5) A reasonable length of the control line should be left outside the unit and the rest should be bundled
and fed into the electric box.
(6) The connection line of the display panel and main board is reliably grounded through the main
board. Beside, communication lines between units also should be grounded.
6.5 Networking and wiring between units
(1) LSQWRF35VM/NhA-M
To Next Page
Loading...
