QUICK-START GUIDE
INDOOR UNIT FRONT PANEL DISPLAY:
Look here for LED display of system
status, setpoint, indoor and outdoor temperatures and malfunction codes.
HIGH-WALL DUCTLESS
AIR CONDITIONING &
HEATING SYSTEM
Models:
NEO09HP115V1A, NEO12HP115V1A, NEO09HP230V1A
NEO12HP230V1A, NEO18HP230V1A, NEO24HP230V1A
NEO30HP230V1A, NEO36HP230V1A
NOTE: Please read the complete owner’s manual
carefully before operation.
Press to power the unit on or off.
Press to select and adjust each mode.
Press to control vertical angle of louvers and to redirect airflow.
Press to activate I FEEL function; allows unit to sense temperature
at the remote controller.
Press to display time of day or time remaining on timer.
Press to boost cooling or heating capacity.
Quickest way to reach preset temperature.
Press to select fan speed (Auto, Low, Medium or High.)
Auto is default.
Press to raise or lower settings including temperature and time.
Press once for slow adjustment, hold down for fast adjustment.
Press to select one of three SLEEP modes, each offering
varying levels of comfort control while sleeping.
See Owner's Manual for more details.
Press to start or stop the timer. (Adjust with“+” and “–” buttons.)
See Owner's Manual for more details.
Press to run fan after cooling cycle to dry off coil and help
inhibit growth of bacteria and mildew.
Press to turn on lights on the unit’s Front Panel Display.
Press again to turn off.
Press to set desired room temperature.
(Adjust with “+” and “-” buttons.)
: AUTO
: COOL
:
FAN ONLY
: HEAT
: DRY
ON/OFF
CLOCK
SLEEP
T-ON T-OFF
X-FAN
I FEEL
LIGHT
TEMP
MODE
SWING
FAN
TURBO
+
_
TWD-0813-031 neo quickstart rev:Layout 1 9/27/13 11:43 AM Page 1
To Next Page
General
