Gree Rio series User Manual

QUICK-START GUIDE
NOTE: Please read the complete owner’s manual
carefully before operation.
Press to power the unit on or off.
Press to select and adjust each mode.
Press to control vertical angle of louvers and to redirect airflow.
Press to boost cooling or heating capacity.
Quickest way to reach preset temperature.
Press to select fan speed (Auto, Low, Medium or High.)
Auto is default.
Press to raise or lower setti
ngs including temperature and time.
Press once for slow adjustment, hold down for fast adjustment.
Press to select one of three SLEEP modes, each offering
varying levels of comfort control while sleeping.
See Owner's Manual for more details.
Press to start or stop the timer. (Adjust with“+”and“–” buttons.)
See Owner's Manual for more details.
Press to run fan after cooling cycle to dry off coil and help
inhibit growth of bacteria and mildew.
Press to turn on lights on the unit’s Front Panel Display.
Press again to turn off.
Press to set desired room temperature.
(Adjust with “+” and “-” buttons.)
ON/OFF
TURBO
FAN
SLEEP
TIMER
_
+
X-FAN
LIGHT
TEMP
MODE
Specifications are subject to change without notice. Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. ©2013. All rights reserved.
For complete instructions on these and other functions, as well as important safety information, see the Owners Manual.
For more information, visit GreeComfort.com.
INDOOR UNIT FRONT PANEL DISPLAY: Look here for LED display of system
status, setpoint, indoor and outdoor temperatures and malfunction codes.
HIGH-WALL DUCTLESS
AIR CONDITIONING SYSTEM
: COOL : DRY : FAN ONLY

Gree Rio series Specifications

General

Cooling Capacity	9000 - 36000 BTU/h
Heating Capacity	9000 - 36000 BTU/h
Noise Level (Outdoor)	50 - 58 dB(A)
Filter Type	Washable Filter
Features	Sleep Mode
Energy Efficiency Ratio (Heating)	3.8 - 4.8
Dimensions (Indoor Unit)	Varies by model
Dimensions (Outdoor Unit)	Varies by model
Weight (Indoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model

Summary

GREE Quick-Start Guide for High-Wall Ductless Air Conditioning System

Remote Control ON/OFF Button

Powers the air conditioning unit on or off.

Remote Control MODE Button

Selects and adjusts operating modes: COOL, DRY, or FAN ONLY.

Remote Control Louvre Adjustment

Controls the vertical angle of louvers to redirect airflow.

Remote Control TURBO Button

Boosts cooling or heating capacity to reach temperature quickly.

Remote Control FAN Speed Selection

Selects fan speed: Auto, Low, Medium, or High. Auto is default.

Remote Control Temperature and Time Adjustment

Raises or lowers settings, including temperature and time.

Remote Control SLEEP Mode

Selects one of three SLEEP modes for comfort control during sleep.

Remote Control TIMER Function

Starts or stops the timer, adjustable using the +/- buttons.

Remote Control X-FAN Function

Runs the fan after cooling to dry the coil and prevent mildew.

Remote Control LIGHT Button

Turns the unit's Front Panel Display lights on or off.

Indoor Unit Front Panel Display Explanation

Details the LED display for system status, setpoint, and temperatures.