Connecting WiFi module to the mainboard WiFi module installation
2.3 Connecting WiFi module to the mainboard
1. Find corresponding connectors on the mainboard (depends on the model of the
unit, see following chapter)
Figure 2: Konektor DISP1
'
&
$
%
Figure 3: Konektor SWING-UD
2. Unplug both original cables from the mainboard
3. Plug the supplied interconnecting cable instead of them
@
@R
to WiFi module (5.)
@
@R
original cables (4.)
@
@I
to mainboard (3.)
Figure 4: Interconnecting cable
4. Plug the original cables into sockets of the interconnecting cable
5. Plug the remaining line of the interconnecting cable into the WiFi module
Installation manual 9
To Next Page
Loading...