GREE U-Match 6 SERIES UNIT SERVICE MANUAL
99
Model: GUD35W1/NhA-S,GUD50W1/NhA-S,GUD71W1/NhA-S,GUD85W1/NhA-S
Removal of fan and motor
Note: Before removing the fan, make sure power is cut off.
Step Picture Work instruction
1. Remove the grill.
Use a screwdriver to
unscrew the two screws on
the upper left and lower
right corners.
2. Remove the fan.
Use a wrench to remove
the specialized nut and
gasket of the fan.
Note: Please keep the nut
and gasket safe after
removing them from the
fan.
3. Remove motor.
Use a screwdriver to
unscrew the bolt of motor.
Note: Motor wire should be
first removed from the
electric box.
4. Install the motor.
Replace with a new motor.
Then tighten up the screw
bolt.