Operating Manual for Central Air Conditioner Thermostat
14
Below are instructions for setting the parameters.
(1) Temperature unit setting
Celsius (
o
C) or Fahrenheit (
o
F) is available. After a stop of the unit, press
(ON/OFF) for 5s to allow a switch of Celsius (
o
C) and Fahrenheit (
o
F).
(2) Fan operation at temperature set points
The fan is able to run at the set speed, low
speed or stop working. As shown in the picture,
after a stop of the unit, keep pressing for 5s to
go to the fan operation setting page.
+
(UP) or
–
(DOWN) is provided to allow a switch of “00”, “01”
and “02”, adjusting the fan operation. Keep pressing
for 5s to save all the settings and the current
page exits. The screen goes back to the page after
you stopped the unit. If there is no any key press
within 20s, the fan operation setting page will exit, not saving any data you set.
To Next Page
Loading...
