Operating Manual for Central Air Conditioner Thermostat
15
(3) Temperature calibration
The ambient temperature could be calibrated between -5
o
C and +5
o
C
with a precision of 0.5
o
C. As shown in the picture, after a stop of the unit,
keep pressing
+
for 5s to go to the temperature
calibaration page.
+
(UP) or
–
(DOWN) is provided
to allow a 0.5
o
C increase or decrease within
-5
o
C~ +5
o
C. Keep pressing
+
for 5s to save all the
settings. The current page exits. The screen goes
back to the page after you stopped the unit. If there
is no any key press within 20s, the current page
will exit, not saving any data you set.
Note: the function is only available for Celsius degrees.
To Next Page
Loading...
