Central Air Conditioner Thermostat
22
(10) Ambient temperature display
If the user enables the indoor ambient
temperature display after the start-up of
the unit, the indoor ambient temperature
will be displayed by default. While the user
is setting a desirable temperature, the
screen provides the desirable temperature.
The screen will display the indoor ambient
temperature after 5 continuous seconds
without a key press.
The screen will not display the indoor
ambient temperature that was disabled but the set temperature.
As shown in the Figure 16, on the parameter setting page, press
(MODE) to switch the option number to 10. (UP) or (DOWN) is provided
to allow a switch between ON and OFF.
Figure 16
To Next Page
Loading...
