Central Air Conditioner Thermostat
4
4 Installation of the thermostat
It should not be tted in the positions below:
(4) Closed thermal pipelines and ues.
(5) Near cool and hot air pipes and radiators.
(6) Near direct sunlight, airflow and other heating objects (such as a
television).
(7) Corners, edges of doors and windows and the front and back of doors.
Notice
(1) Hard plastic lines, if used, must be bent at a proper angle.
(2) Wire in accordance with the wiring diagram.
(3) Fit the thermostat in accordance with the installation diagram.
(4) One thermostat can only drive a two-row-coil unit and an electric water
valve.
To Next Page
Loading...
