Central Air Conditioner Thermostat
5
(5) When removing the flexible flat cable (FFP), unplug its end with the
thumb and the index nger but not pull its main body.
(6) Do not hurl it or press forcibly its LCD.
(7) Don’t hit and drop it, and protect it from deformation.
(8) Keep its inside clean against other objects such as water and mud.
(9) The 86x86 junction box shall be subject to the ame-retardant class.
(10) No inammables are placed near the installation locations.
(11) A fireproof metallic 86x86 junction box is required to be used for
reproof areas.
4.1 Installation position
As shown in the picture below, the thermostat should be tted on the position
1.5 meters above the oor.
1.5m
To Next Page
Loading...
