Green Bike KT-LCD4 - User Manual

E
bike
Display
KT
—
LCD4
User
Manual
www.greenbikekit.com
2
用户手册
User Manual
KT-LCD4 E-Bike Special Meter
www.greenbikekit.com
info@greenbikekit.com

Summary

Preface

Outlook and Size

Meter Dimension

Provides dimensions of the KT-LCD4 meter, including height and width.

Main Material and Color

Details the primary material (PC) and housing color (black) of the KT-LCD4 meter.

Wiring Schematic

Installation Instruction

Φ 22.2 handlebar diameters install icon

Illustrates the installation of the meter on handlebars with a 22.2mm diameter.

Physical installation icon

Visual representation of the physical mounting of the meter.

Function Overview

Display Content

Button Definition

Normal Operation

On;Off

Explains how to turn the KT-LCD4 meter on and off using the power button.

Display Interface

Display 1

Shows the initial display screen of the KT-LCD4 meter.

Display 2

Presents the second display screen accessible from Display 1.

Display of Turned on Throttle

PAS Ratio (or throttle) Gear Switch

Power Assistant Push Function

Cruise Function

Start-up Back-lights and Headlights

Brake status display

Battery Capacity Indicator

Voltage shortage flashes

Indicates what happens when the controller is powered off due to low voltage.

Single Data Clearing

Automatically Prompt Interface

Error Code Display

User Setting Project

General project setting

Introduces the general project settings section for meter configuration.

Maximum Trip Speed

Wheel Diameter

Metric and Imperial Units

Exit General Project Setting

P Parameter Setting

P1 Motor Characteristic Parameter Setting

Setting the motor's gear reduction ratio and magnet pieces for accurate calibration.

P2 Wheel Speed Pulse Signal Setting

P3 Power Assist Control Mode Setting

P4 Throttle Start-up Setting

P5 Power Monitoring Setting

Exit P Parameter Setting

C Parameter Setting

C1 Power-Assist Sensor and Parameter Select Setting

Configures the type of power assist sensor and its sensitivity.

C2 Motor Phase Classification Coding Setting

C3 Power Assist Ratio Gear Initialization Setting

C4 Throttle Function Setting

C5 Controller Maximum Current Adjustment Setting

C6 Backlight Brightness Adjustment Setting

C7 Cruise Function Setting

C8 Motor Operating Temperature Display Setting

C9 Start-up Password Setting

C10 Automatically Restore Factory Setting

C11 Meter Attribute Selection Setting

C12 Controller Minimum Voltage Adjustment Setting

C13 ABS brakes of the controller and parameters of anti-charge control Setting

C14 Power-assist tuning parameters Setting

Exit Parameter Setting

Parameter Copy

User Setting Note

Version Information

Green Bike KT-LCD4 Specifications

General

Type	LCD Display
Voltage	24V/36V/48V
Handlebar Size	22.2mm
Power Assist Levels	5 Levels
Waterproof Rating	IP65
Backlight	Yes