Green Brook T80-C - Setting Switching Times; Configure ON Time and Day; Configure OFF Time and Day

IMPORTANT
This unit should be installed to current IEE wiring regulations if in doubt
consult a qualified electrician.
Setting Switching Times (6 on/ offs available)
Press ‘Timer’ button once
Set ON time by press ‘h+’ (Hours) & ‘m+’ (minutes)
Set DAY by pressing ‘Day’
Press ‘Timer’ button once
Set OFF time by press ‘h+’ (Hours) & ‘m+’ (minutes)
Set DAY by pressing ‘Day’
Pressing ‘Timer’ button once again will move the timer to programme 2.