Green Cell POWER INVERTER

Need help?

Do you have a question about the Green Cell POWER INVERTER and is the answer not in the manual?

Summary

Inverter Diagram and Identification

Inverter Connection Guide

Product Overview and Features

Preface and Introduction

Introduces the Green Cell inverter, its purpose, and benefits for various applications and travel.

Product Features and Applications

Details product features like sine wave types and protection systems, and lists suitable devices for pure and modified sine wave inverters.

Safety Guidelines and Precautions

General Safety Warnings

Covers electrocution risks, handling precautions, environmental exposure, and basic connection rules for safe operation.

Operating Cautions and Prohibitions

Details temperature limits, dust environment, correct voltage connection, and warnings against unauthorized repairs or specific equipment use.

Operational Procedures and Status

Connection and Powering On

Details correct battery connection, tightening terminals, plugging devices, and starting the inverter with LED indicators.

Grounding and Working Status

Explains the importance of grounding and how to interpret the inverter's operating status via LED indicators and low battery alarms.

Inverter Operation and Product Details

Operational Warnings and Power Source

Covers inverter shutdown causes (overload, temperature, voltage surge) and recommendations for cyclic operation batteries.

UPS Green Cell Inverter Features

Details the 12V-230V, 300W/600W UPS inverter with pure sine wave, its function during power cuts, and compatible sensitive devices.

Device Description and Operation Status

Device Features and Connections

Details the inverter's front and back panel components, including power socket, ground screw, power button, mains cable, and USB port.

Inverter Status Indicators and Failures

Explains the meaning of Green, Red, and Two-colour LEDs, and common failure alerts like low battery or no output voltage.

Troubleshooting Common Issues

Device Not Working or No Power

Addresses causes like battery defects, reverse polarity, or loose connections, and provides solutions.

Low Output Current or Voltage

Explains issues with low readings from standard ammeters and low inverter current levels, suggesting battery checks.

Overload and Overheating Shutdowns

Covers overload shutoffs due to excess power or peak power, and overheating due to poor ventilation, with recommended actions.

Inverter Alerts and Alarms

Details causes and solutions for sound alerts, including low voltage, overheating, and high power draw from connected devices.