EasyManua.ls Logo

Green Transporter Q Runner - Gauges and Indicator Lights; Ignition Switch Operation; Speed Control Button; Speaker and Horn Function

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
2.3 Gauges and indicator lights
5
ON
OFF
Headlamps
(1) Left and right turn indicator: the Left and right turn indicator flashes when
the turn signal button is pressed.
(2) High Beam indicator: The mitsu indicator lights up when the dimming
switch button is in the” ” position.
(3) HEADLAMP indicator: When the headlamp switch button is in the
position, the headlamp indicator light will beon.
(4) Electricity meter: when the electric door lock is opened, the battery charge is
displayed.
(5) SPEEDOMETER: When a vehicle is moving, it shows the speed at which the
vehicle is moving.
(6) ODOMETER: a record of the mileage of a vehicle.
(When the electronic lock is turned on, the ODO below the meter is the
total mileage, which automatically changes after 30 seconds, and the TRIP is
the number of miles per TRIP.)
(7) Radio volume display.
(8) The radio shows on and off.
Vehicle speed
Left and right turn directions
Electric capacity
Radio volume
Radio
Mileage
Figure 1
2.4 Adjustable seat cushion
Figure 2
(1) Push the button up to adjust the seat back position.
(2) Push the button up to adjust the distance between the front and back
of the seat.
2.5 Ignition switch
(1) Off (OFF)-when the switch is turned to this position, the power will be
turned OFF and the car keys can be pulled out.
(2) Off (ON)-switch to this position, power ON, instrument ON,
instrument display, can start the motor, at this point, car keys can not be
pulled out.
Figure 3
2.6 Speed Control Button
Figure 4
(1) The speed of this vehicle can be adjusted by the button (figure 4 the )
speed.
2.7 A speaker (figure 4 the )
(1) When you press this" " switch button, the horn will make a sound.
Light switch
Forward and reverse
Gear position
Speed control
turn handle function
Loudspeakers
Double Flash
Steering Switch
Low Light
High Beam
2.8 Temporary stop switch (figure 4 the )
Press” ” button, rear double flash open, warning to remind the rear of the car.
2.9 Steering Signal Switch (figure 4 the )
Button to the ” mark position, it means to turn left, at this time the left turn
signal and left turn indicator light;
Button to the mark position, it means to turn right, at this time the right
turn light and right turn indicator light;
The button is in the middle The turn signal goes off when the position is
marked.

Other manuals for Green Transporter Q Runner

Related product manuals