Simplified Programming Instructions
for T612-C / T634-C
Clock Setting –
Press ‘CLOCK’
Press ‘DAY’ to select correct day
Press ‘Hour+’ or ‘Hour –‘ to select correct hour of the day
Press ‘Min+’ or ‘Min-‘to select correct minutes.
Important Notes –
• 3 x ON / OFF’s can be set for each channel. One of the following
options can be chosen for each on/off -
a. Mon to Sun
b. Mon to Fri
c. Sat and Sun
d. Any day in the week
• The start and end time must be both set. Otherwise the timer will
ignore the settings that have been entered.
• Must ensure the same day is also set for ON and OFF time.
Programming – (Applies to each channel)
Hold down ‘PROGRAM’ and then press the desired channel button
To Next Page
Need help?
General
