Need help?Do you have a question about the Greencut GS620X and is the answer not in the manual?
Explains symbols and signal words like ATTENTION and NOTE for hazard communication.
Do not force the machine, be alert, avoid exhaust gases, check safety features, maintain foot support, hold with both hands.
Do not inhale/ingest fuel, clean spills, refuel in ventilated areas, avoid flames/sparks.
Awareness of rebound, forward pull, and recoil forces during operation.
Explains hazard symbols like danger, flammable fuel, hot surface, deadly gases, and more.
Remove spacers, mount sword, install chain, mount brake cover, adjust chain tension.
Adjust tensioner, tighten nuts, check chain movement, loosen nuts before adjusting.
Remove sword cover, use decompression valve/starter bulb, set choke, pull starter rope.
Check nuts/bolts, air filter, fuel filter, spark plug, fuel tank, fuel line, chain, idle speed.
Covers causes like defective starter, loose spark plug, or incorrect fuel mixture.
Addresses low compression, no spark, wet or dirty spark plugs.
General| Engine Displacement | 62 cc |
|---|---|
| Bar Length | 20 inches |
| Fuel Tank Capacity | 550 ml |
| Oil Tank Capacity | 260 ml |
| Chain Pitch | 0.325 inches |
| Engine Type | 2-stroke |
To Next Page
