Greenfield 11203 - Back and Front Panel Assembly; Step 1 & 2: Back Panel Assembly; Step 3 & 4: Front Panel Assembly

Insert ⅞” x 3” x 46½” back rail (part 8)
into top hole in back right post (part
2). Insert 1½” x 5½” x 46½” back rail
(part 9) into top of large hole of back
right post. Insert one table support
(part 4), into bottom of large hole of
back right post. Insert one shelf
support (part 5) into bottom hole of
right back post. Insert free ends of all
rails into corresponding holes of back
left post (part 1).
Flip over potting bench back panel,
keeping parts inserted into posts.
Using ¾” kappet screws,
screw together potting
bench back panel. Be
sure that all parts are fully
inserted into posts before
securing. Snap kappet
screw caps over screw
heads.
Insert one table support (part 4), into
top hole of one front post (part 1).
Insert one shelf support (part 5) into
bottom hole of same front post. Insert
free ends of table and shelf support
into corresponding holes of second
front post (part 1).
Flip over potting bench front panel,
keeping parts inserted into posts.
Using ¾” kappet screws, screw
together potting bench front panel.
Be sure that all parts are fully inserted
into posts before securing. Snap
kappet screw caps over screw heads.
1
2
3
4