Greenfield 11203 User Manual

Greenfield
POTTING BENCH
Model# 11203 Assembly Instructions
General Information:
» Read through carefully before beginning assembly.
» When assembling components, place on a clean, flat,
non-abrasive surface to avoid scratches.
» In the event of missing or defective parts, please call our
customer service department directly at 1-877-258-6020
Tools required:
» Cordless Drill with #2 phillips bit
» File or Sandpaper
» Rubber Mallet (optional)
Part # Description Qty
1 2” sq. x 48¼” Back Left Post 1
2 2” sq. x 48¼” Back Right Post 1
3 2” sq. x 38” Front Post 2
4 1½” x 4” x 46½” Table Support 2
5 1½” x 4” x 46½” Shelf Support 2
6 1½” x 4” x 20¼” Side Rail 4
8 ⅞” x 3” x 46½” Back Rail 1
9 1½” x 5½” x 46½” Back Rail 1
10 1½” x 5½” x 42½” Shelf Rail 1
11 10¾” Shelf Support Bracket 2
12 1½” x 5½” x 43” Table Top Rail 3
13 ⅞” x 1½” x 16½” Table Brace 2
14 16½” Table Top End Cap 2
15 5½” Shelf End Cap 2
16 Hardware Kit (includes):
2” sq. Post Cap 4
1¼” Kappet Screws 12
¾” Kappet Screws 48
Kappet Screw Caps 48
PVC Cement Can 1
7 ⅞” x 3” x 20¼” Table/Shelf Rail 14
Parts List:
FIGURE 1
Product dimensions &
Part identification

Greenfield 11203 Specifications

General

Brand	Greenfield
Model	11203
Category	Outdoor Furnishing
Language	English

Summary

Introduction and Preparation

General Information

Read instructions before assembly, use clean surface, contact for parts.

Tools Required

Lists necessary tools: cordless drill, file/sandpaper, rubber mallet.

Component Identification

Parts List

Comprehensive list of all parts with descriptions, quantities, and part identifiers.

Product Dimensions & Part Identification

Visual guide showing product dimensions and identifying each part number.

Back and Front Panel Assembly

Step 1 & 2: Back Panel Assembly

Assemble and secure the back panel components, including rails and posts.

Step 3 & 4: Front Panel Assembly

Assemble and secure the front panel components, including supports and posts.

Main Structure and Table Top Assembly

Step 5 & 6: Main Frame Assembly

Attach shelf rails and side rails to the back and front panels, then secure the frame.

Step 7: Table Top Rail and End Cap Installation

Install table top rails and end caps using screws, glue, and finishing touches.

Shelf and Final Assembly

Step 8 & 9: Shelf Assembly and Installation

Assemble the shelf with brackets and end caps, then install it into the back panel.

Step 10: Post Caps and Table Top Placement

Apply post caps and place the removable table top for the potting bench.