Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property damage!
1
Hinge Kit
WARNING
Disconnect power and observe proper lock out tag
out procedures per OSHA regulation (Title 29 code of
federal regulations part 1910.147 & 1910.333).
Note: If fan is connected to electrical source via rigid
connection, a qualified electrician will need to change
the rigid connection to a flexible connection long
enough per local electrical codes to allow for fan
movement.
462866 - Hinge Kit | Cover drawing
462866 - Hinge Kit | FIGURE 4
462866 - Hinge Kit | FIGURE 5
462866 - Hinge Kit | FIGURE 7
462866 - Hinge Kit | FIGURE 1
462866 - Hinge Kit | FIGURE 3 and 6
462866 - Hinge Kit | FIGURE 2
3/4 inch
2-13/16 inch
13/16
inch
4 inches
7/8 inch
5/16 inch diameter
(two holes)
2 inches
2-3/4
inches
5/16 inch diameter
3/4 inch
Spacers
5/16 inch diameter
(two holes)
13/16
inch
2-13/16 inch
Document 462866
Hinge Kit
G/GB - Sizes 075-203
CUE/CUBE - Sizes 075-200
®
®
To Next Page
Need help?
General
