Greenheck Models SQ, BSQ and BDF catalogs provide
additional information describing the equipment, fan
performance, available accessories, and specification data.
Isolator Parts List
STANDING SUPPORT ISOLATOR HANGING SUPPORT ISOLATOR
No Qty Description
SQ-60 thru 140
BSQ-100 thru 140
BDF-80 thru 150
SQ-160
BSQ-160 thru 420
BDF-180 thru 200
No Qty Description
SQ-60 thru 140
BSQ-100 thru 140
BDF-80 thru 150
SQ-160
BSQ-160 thru 420
BDF-180 thru 200
1 8
Cadmium plated
hex head bolts
3/8 in. - 16 x 1 in.
3/8 in. - 16 x 1
1/4 in.
1 8
Cadmium plated
hex head bolts
3/8 in. - 16 x 1 in. 3/8 in. - 16 x 1 1/4 in.
2 8
Cadmium plated
hex nuts
3/8 in. - 16 3/8 in. - 16 2 16
Cadmium plated
hex nuts
3/8 in. - 16 3/8 in. - 16
3 4
Cadmium plated
hex head bolts
5/16 in. - 18 x 1 in. 3/8 in. - 16 x 1 in. 3 4
St. mount bracket
w/1 - 1/4 in hole
3/16 in. 1/4 in.
4 8
St. mount bracket
w/2 - 7/16 in.
holes
3/16 in. 1/4 in. 4 4
St. mount
bracket w/2 -
7/16 in. holes
3/16 in. 1/4 in.
5 20
Cadmium plated
washer
7/8 in. O.D x 3/8 in.
I.D. x 1/16 in.
7/8 in. O.D x 3/8 in.
I.D. x 1/16 in.
5 24
Cadmium plated
washer
7/8 in. O.D x 3/8 in.
I.D. x 1/16 in.
7/8 in. O.D x 3/8 in.
I.D. x 1/16 in.
6 12
Cadmium plated
lock washer
3/8 in. 3/8 in. 6 12
Cadmium plated
lock washer
3/8 in. 3/8 in.
7 4
Cadmium plated
washer
1 3/8 in. O.D x 9/16
in. I.D. x 3/32 in.
1 3/8 in. O.D x 9/16
in. I.D. x 3/32 in.
7 12
Cadmium plated
washer
1 3/8 in. O.D x 9/16
in. I.D. x 3/32 in.
1 3/8 in. O.D x 9/16
in. I.D. x 3/32 in.
8 4
Neoprene or
Spring Isolator
Reference appropriate table on page 1
for replacement Isolator(s)
8 4
Neoprene or
Spring Isolator
Reference appropriate table on page 1 for
replacement Isolator(s)
5
Base Isolator
Isolator I.D. - BVI
Isolator
I.D. - BSI
Hanging Isolator
1
1
1
1
2
2
3
4
4
5
5
5
5
5
6
6
6
7
8
Unit side panel
Base fastener
(by installer)
Unit side panel
Note: Top bracket
is reversible for
mounting unit 90°
from indicated.
(SQ and BSQ only)
5
Base Isolator
Isolator I.D. - BVI
Isolator
I.D. - BSI
Hanging Isolator
1
1
1
1
2
2
2
2
2
2
3
3
4
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
7
7
7
7
8
8
Unit side panel
Base fastener
(by installer)
Unit side panel
Note: Top bracket
is reversible for
mounting unit 90°
from indicated.
(SQ and BSQ only)
5
Base Isolator
Isolator I.D. - BVI
Isolator
I.D. - BSI
Hanging Isolator
1
1
2
2
2
2
3
4
5
5
5
5
5
6
6
6
7
7
7
8
8
Unit side panel
Base fastener
(by installer)
Unit side panel
Note: Top bracket
is reversible for
mounting unit 90°
from indicated.
(SQ and BSQ only)
5
Base Isolator
Isolator I.D. - BVI
Isolator
I.D. - BSI
Hanging Isolator
1
1
1
1
2
2
2
2
2
2
3
3
4
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
7
7
7
7
8
8
Unit side panel
Base fastener
(by installer)
Unit side panel
Note: Top bracket
is reversible for
mounting unit 90°
from indicated.
(SQ and BSQ only)
Pre-Starting Checks
Check all fasteners for tightness.
Maintenance
All fasteners should be checked for tightness each time
maintenance checks are performed prior to restarting
the unit. A proper maintenance program will help these
units deliver years of dependable service.
NOTE: Before taking any corrective action, make certain
unit is not capable of operation during repairs.
469092 • Isolator Mounting Accessory, Rev. 4, October 2017 Copyright 2017 © Greenheck Fan Corporation2
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the
Library under Warranties.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
Our Commitment
AMCA Publication 410-96, Safety Practices for Users and
Installers of Industrial and Commercial Fans, provides
additional safety information. This publication can be obtained
from AMCA International, Inc. at www.amca.org.
To Previous Page
Loading...
Need help?
General
