4
Important Safety Information
Electric shock hazard:
Contact with live circuits can result in severe injury or death.
Electric shock hazard:
• Do not use the unit if it is wet or damaged.
• Inspect the test leads before use. They must be clean and dry, and the insulation
must be in good condition.
Failure to observe these warnings can result in severe injury or death.
Electric shock hazard:
• Do not apply more than the rated voltage between the two probes, or between either
probe and earth ground.
• Do not contact the probe tips or any uninsulated portion of the accessory.
Failure to observe these warnings can result in severe injury or death.
To Next Page
Loading...
