Greenlee 854DX - 854 DX Electric Bender Product Overview; Critical Safety Information; Manual Purpose and Scope

854DX Electric Bender
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
All specications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3–5
Grounding Instructions .................................................. 6
Specications ................................................................ 6
Identication .................................................................. 7
Features ......................................................................... 8
Transporting Bender and Pivoting Bending Head ......... 9
Setup ........................................................................... 10
Operation ................................................................ 10–15
Basic Programmed Bending .................................... 12
Optional 02840 Shoe Group for
PVC-Coated Conduit Bending............................13–14
COATED PIPE or STANDARD PIPE Modes ............. 14
Squeeze Adjustment ................................................ 15
Illustrated Bending Glossary ....................................... 16
Bending Instructions ..............................................17–18
Additional Bending Instructions .............................19–21
Additional Bending Tables ......................................22–30
Maintenance ...........................................................31–32
Description
The Greenlee 854DX Electric Bender is intended to bend
1/2" to 2" conduit and pipe. This bender has the capa-
bility to accommodate the following types of conduit
and pipe:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
• Aluminum Rigid
• Schedule 40 Pipe
• Stainless Steel Rigid
• PVC-Coated Rigid Conduit (with optional accessory)
In addition, the 02840 shoe group accessory is available
for bending 1/2" to 2" 40 MIL PVC-coated rigid conduit.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee 854DX Electric Bender.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.