2
Description
The Greenlee CM-1360, CM-1560, CMH-1000, and CMI-1000 Clamp Meters are hand-held testing devices
with the following measurement capabilities: AC and DC voltage, AC current, AC current AmpTip™,
frequency, non-contact electric field (EF) detection, resistance, and capacitance. They also check diodes
and verify continuity. These meters are designed to be placed on or removed from insulated or uninsulated
conductors.
Additional functionality specific to each model includes:
Function CMI-1000 CM-1560 CMH-1000
AC + DC Voltage • •
DC Current AmpTip™ • •
DC + AC Current AmpTip™ • •
DC Current • •
Flashlight • •
µDC Current • •
Temperature (K-style thermocouple) • •
Motor Rotation • •
Phase Rotation • •
Peak RMS Capture • • •
5 ms Crest • • •
Other capabilities include:
• Hold Mode to capture the present LCD value
• Record Minimum, Maximum, or Average Mode
• Zero Mode
• Intelligent Auto Power Off
• Automatic ranging
• Backlit LCD
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information provided.
Purpose of This Manual
This instruction manual is intended to familiarize all personnel with the safe operation and maintenance
procedures for the Greenlee CM-1360, CM-1560, CMH-1000, and CMI-1000 Clamp Meters.
Do not discard this product or throw away!
All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
® Registered: The color green for electrical test instruments is a registered trademark of TextronInnovations Inc.
AmpTip is a trademark of BTC.
KEEP THIS MANUAL
w ww. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
