CM-660 • CM-860 • CM-960 • CMH-600 • CMI-600
9
Using the Test Leads
Electric shock hazard:
The test leads supplied with this product comply with safety standards that limit the
exposed length of the probe tip to 4 mm for measurement categories III and IV. These
test leads include a cap that must be in place when used in measurement category III
or IV applications.
Failure to observe this warning could result in severe injury or death.
Cap must be in place for measurement category III or IV applications.
Cap can be removed for measurement category I or II applications.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
