To Next PageTo Next Page
Need help?Do you have a question about the Greenlee G1 Versi-Tugger and is the answer not in the manual?
Failure to read and understand manual instructions will result in severe injury or death.
Do not operate in hazardous environments with flammable liquids/gases; failure results in severe injury or death.
Do not use near live circuits; shut off and lock out power.
Inspect and verify load capacity of supports and components to prevent breakage and injury.
Only allow pulling line to contact capstan; other components can break and cause injury.
Do not stand under vertical pulls; falling cable can cause severe injury or death.
Use only approved pulling lines rated for the application; do not use general-purpose rope.
Use ropes with minimum rated capacity of 1500lb and breaking strength of 6000lb; check condition.
Keep personnel out of the pull line path; breaking components can cause severe injury or death.
Check rope condition; do not maintain stationary rope on capstan to prevent breakage.
Do not allow rope to overlap capstan; relax tension or shut off puller if overlap occurs.
Use connectors with a max rated capacity of 1500lb; under-rated connectors can break.
Use only 12V-20V pistol grip cordless drills; do not use corded, right angle, D-handle, or higher voltage drills.
Keep hands away from capstan; rope can crush hand.
General
