EasyManuals Logo

Greenlee NETcat NC-100 User Manual

Greenlee NETcat NC-100
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
NC-100 NETcat
®
Micro
Electric shock hazard:
Using this unit in a high frequency activated area may result in unstable or inaccurate
readings.
Do not drop or get the unit wet as it may cause internal damage.
Do not attempt to repair this unit. It contains no user-serviceable parts.
Do not expose the unit to extremes in temperature or humidity.
Refer to “Specifications.”
Use this unit for the manufacturer’s intended purpose only, as described in this manual.
Any other use can impair the protection provided by the unit.
Failure to observe these precautions may result in injury and can damage the unit.
Important Safety Information
Electric shock hazard:
This unit is capable of withstanding voltage input
conditions when connected to normal telephony
equipment (i.e., 50 VDC) for short periods. Testing
is inhibited when greater than a few volts is
connected across a pair with the message shown
here displayed on the screen. Disconnect the unit
immediately to prevent permanent damage.
Failure to observe this precaution may result in injury and can damage the unit.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Greenlee NETcat NC-100 and is the answer not in the manual?

Greenlee NETcat NC-100 Specifications

General IconGeneral
Display typeLCD
Product colorGreen
LED indicatorsYes
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Operating voltage9 V
Number of batteries supported1
Weight and Dimensions IconWeight and Dimensions
Weight220 g
Dimensions (WxDxH)70 x 33 x 150 mm

Related product manuals