EasyManua.ls Logo

GreenPan BISTRO - Proof, Dehydrate, and Warm Functions; Slow Cook and Pizza Functions; Pizza Function Details

GreenPan BISTRO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
PROOF
1. Place the food in the Baking Pan and then
place the Baking Pan in the oven. Close the
oven door.
2. Select Proof function, default setting is 80°F
(not shown), 4 hours.
a) The timer can be adjusted between
1 to 12 hours.
3. Tap-touch Start key to start cooking.
Note: In this cycle, the bottom heating
elements operate and glow red/orange, and
the top convection fan will work in low speed.
DEHYDRATE
1. Place the food on the Frying Basket and then
place the frying basket in the oven. Close the
oven door.
2. Select Dehydrate function, default setting is
150°F (not shown), 4 hours.
a) The timer can be adjusted between
1 to 20 hours.
3. Tap-touch Start key to start cooking.
CAUTION: In this cycle, the top heating
elements operate and glow red/orange, and
the top convection fan will work in low speed.
WARM
1. Place the food on the Baking Pan and then
place the Pan in the oven. Close the oven door.
2. Select Warm function, default setting is 175°F
(not shown), 30 minutes.
a) The timer can be adjusted between
1 to 90 minutes.
3. Tap-touch Start key to start cooking.
CAUTION: In this cycle, the top heating
elements operate and glow red/orange, and
the top convection fan will work in low speed.
SLOW COOK
1. Place food on the Baking Pan, then place the
Baking Pan into oven (lower rack position)
carefully. Close the oven door.
Note: the maximum size (L x W x H) of
cooking vessel is 12.4 x 11.2 x 5.2 inches
2. Select Slow Cook function, default setting is Hi,
3 hours.
a) The temperature can be adjusted to Lo.
b) The timer can be adjusted between
0.5 to 8 hours.
3. Tap-touch Start key to start cooking.
CAUTION: In this cycle, the top heating
elements operate and glow red/ orange, and
the top convection fan will work in low speed.
PIZZA
1. Place the pizza on the on top of the Wire Rack
in the oven. Close the oven door.
2. Select Pizza function, default setting is 400°F
(not shown), 20 minutes.
a) The timer can be adjusted between
1 to 90 minutes.
i. After Pizza function is selected, preheat
will begin and “PrE” will be displayed on
the screen. When preheating is complete,
the oven will beep three times and “Add
Food” will be displayed on the screen.
Open the door to add food and close the
door, then press “Start” for the timer to
begin counting down.
3. Tap-touch Start key to start cooking.
Note: In this cycle, both the top and bottom
heating elements operate and glow
red/orange, and the top convection
fan will work in low speed.

Related product manuals