GreenTech Pureheat 2-in-1 User Manual

10
CLEANING
DISCONNECT PUREHEAT 2-IN-1 FROM THE OUTLET BEFORE ANY MAINTENANCE OR CLEANING.
Cleaning the Filter
The lter should be cleaned every 30 days or more often if you nd that the lter is collecting
visible particulate.
1. Unplug the POWER CORD from the outlet.
2. Remove the FILTER ASSEMBLY SCREW using a screwdriver. Place the screw aside
where you will not misplace it.
3. Slide the FILTER ASSEMBLY straight out of the rear of the unit until it is free.
4. Carefully remove the FILTER from the FILTER ASSEMBLY.
5. Use a vacuum cleaner to remove built up particulate from the FILTER.
6. Carefully replace the FILTER in the FILTER ASSEMBLY.
7. Slide the FILTER ASSEMBLY straight in to the rear of the unit until it is properly seated.
8. Replace the FILTER ASSEMBLY SCREW using a screwdriver. Tighten until snug.
9. Plug the POWER CORD back into the outlet.
Cleaning the Unit
1. Unplug the POWER CORD from the outlet
2. Carefully wipe the exterior of the unit with a soft, damp (not wet) cloth and dry
thoroughly with a soft, dry cloth. Do not use harsh or abrasive cleaners as these
may damage the aesthetic nish of the unit.
3. Remove particulate that may have gathered in the FRONT GRILLE using a vacuum
with a brush attachment.

GreenTech Pureheat 2-in-1 Specifications

General

Brand	GreenTech
Model	Pureheat 2-in-1
Category	Heating System
Language	English