Need help?Do you have a question about the GreenWave Reality Gateway and is the answer not in the manual?
General| Brand | GreenWave Reality |
|---|---|
| Model | Gateway |
| Category | Gateway |
| Language | English |
Details the Gateway's role in connecting PowerNodes for remote monitoring and control.
Describes Ethernet, USB, and power adapter sockets for network and power connections.
Details the Sync button and status indicators for WAN, LAN, and Power.
Explains patterns and colors of the Sync button indicating device status and association modes.
Describes Network and Web indicators, showing connection status to network and internet.
Ensures home network is operating and connected to the Internet before installation.
Outlines the four basic steps for installing the Gateway: connect, power, verify, and prepare for PowerNodes.
Connects the Gateway to a home network router using an included Ethernet cable.
Powers the Gateway by plugging it into an electrical outlet using the included power adaptor.
Confirms the Gateway is connected when the sync button turns blue.
Details connecting appliances to PowerNodes and then connecting them to your network.
Emphasizes reviewing the 'Safety Information' chapter for important safety guidelines.
Advises keeping clear paths for radio communication between Gateway and PowerNodes.
Explains the process for adding a PowerNode to the home network, called inclusion.
Press and hold the PowerNode button to display a clockwise-rotating pattern for inclusion.
Successful inclusion shown by a rapidly flashing pattern after the rotating pattern stops.
Details the process to remove a PowerNode's association from a Z-Wave network.
Unplug, press/hold PowerNode button while plugging in to initiate exclusion.
Exclusion complete when activity indicator flashes rapidly; check for slow flashing failure.
Gateway is for dry, indoor locations only; avoid high humidity or wet environments.
Gateway has no user-serviceable parts; contact Customer Service for repairs.
Provides conditions and steps for arranging service for damaged or malfunctioning Gateway.
Specifies operating temperature, storage temperature, operating humidity, and storage humidity ranges.
Provides the physical dimensions and weight of the Gateway device.
To Next Page