What to do if the GreenWorks BA09B00 Blower motor fails to start?
If the GreenWorks Blower motor doesn't start when you press the trigger, make sure the blower is plugged into a working electrical outlet. If it is plugged in, there may be a defective power switch.
What to do if GreenWorks BA09B00 Blower starts but no air flows?
If the GreenWorks Blower starts but no air flows through the tube, the tube is likely blocked. Clear the blockage to restore airflow.
Why doesn't the cruise control lever work on my GreenWorks BA09B00?
If the cruise control lever on your GreenWorks Blower isn't working, the screw may be loose. Use a Phillips head screwdriver to tighten the screw.
What to do if my GreenWorks Blower motor fails to start?
If the GreenWorks Blower motor doesn't start when you press the trigger, make sure the blower is properly plugged into an electrical outlet. If it is plugged in, there may be a defective power switch. In that case, it is suggested to call the Toll-Free Helpline: 1-888-909-6757.
What to do if air will not flow through the tube of my GreenWorks Blower?
If your GreenWorks Blower starts but no air flows through the tube, the tube might be blocked. Clear the blockage to restore airflow.
Why doesn't the cruise control lever on my GreenWorks Blower work?
If the Cruise Control Lever on your GreenWorks Blower isn't working, it might be due to a loose screw. Tighten the screw using a Phillips head screwdriver to resolve the issue.
General| Power Source | Battery |
|---|---|
| Voltage | 40V |
| Max Air Speed | 125 MPH |
| Noise Level | 65 dB |
| Battery Type | Lithium-Ion |
Details the product's type, motor, airflow, velocity, and weight.
Essential safety warnings and operational guidelines for safe blower usage.
Safety advice on electrical connections and potential chemical hazards.
Specific safety measures to ensure children's safety around the operating blower.
Explains various symbols used on the product and their designations for safe operation.
Guidance on servicing the unit, emphasizing qualified personnel and using identical parts.
Details the main parts of the blower like the tube, trigger, cruise control, and cord lock.
Critical safety warnings that must be observed during the assembly process.
Step-by-step instructions for attaching the blower tubes.
Instructions on how to safely connect the extension cord to the blower.
How to start, stop, and control the speed of the blower using the trigger and cruise control.
Guidelines on proper posture and essential checks before operating the blower.
Advice for efficient and safe operation, including noise reduction and water conservation.
Information on air vents and how to properly sweep and advance the blower during use.
Specific warnings about loose clothing, hair, and wearing gloves during operation.
How to clean the unit safely and warnings against harsh cleaners.
Guidelines for storing the unit and inspecting extension cords for damage.
A table listing common issues like motor failure or no airflow and their corresponding solutions.
Details what the warranty covers, items not covered, and helpline information.
An illustrated diagram showing the breakdown of blower components with item numbers.
Lists part numbers, descriptions, and quantities for blower components.
To Next Page
