8
KNOW YOUR BLOWER
KNOW YOUR BLOWER
(
See Figure 1
)
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of
this product, familiarize yourself with all operating features and safety rules.
BLOWER TUBE
The blower tube can be easily installed on the blower without any additional tools.
TRIGGER
Starts/Stops the ow of air through the blower.
CRUISE CONTROL LEVER
Pull backwards on the Cruise Control Lever to engage and lock the trigger. Push forward on the
Cruise Control Lever to release and disengage the trigger.
CORD LOCK
Make a loop in the extension cord (not included), and pass it through the gap at the rear of the
blower. Place it over the hook, and pull the cord tight (See Figure 4).
Fig. 1
Cruise Control Lever
Trigger
Power Cord
Blower Tube
Cord Lock
To Next Page
Loading...
