5.1 CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
5.2 GENERAL MANINTENANCE
• Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
• Clean the machine with a dry cloth. Do not use
slovents.
WARNING
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
CAUTION
Use only approved replacement parts.
6 TECHNICAL DATA
Voltage 24 V
Strokes per minute 0-3000 min
-1
Cutting angle 0-45°
Orbital motion 4 settings
Blade changing Tool-Free
Weight without battery 2.2 kg
Battery model G24B2/G24B4 and other
BAG series
Charger model 2913907 and other CAG
series
Measured sound pressure
level
88.5dB(A), K
pA
= 5 dB(A)
Measured sound power
level
99.5dB(A), K
wA
= 5 dB(A)
Vibration 5.2 m/s
2
, K = 1.5 m/s
2
The recommended ambient temperature range:
Item
Temperature
Appliance storage temper-
ature range
32°F (0°C) - 113°F (45°C)
Appliance operation tem-
perature range
32°F (0°C) - 113°F (45°C)
Battery charging tempera-
ture range
39°F (4°C) - 104°F (40°C)
Charger operation temper-
ature range
39°F (4°C) - 104°F (40°C)
Battery storage tempera-
ture range
32°F (0°C) - 113°F (45°C)
Battery discharging tem-
perature range
32°F (0°C) - 113°F (45°C)
7 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website )
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner’s manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
8 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Globe Technologies Europe GmbH
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Name and address of the person authorised to compile
the technical file:
Name:
Ralf Pankalla
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Herewith we declare that the product
6
English
EN
To Next Page
Loading...