This document is an owner's manual for the Greenworks 80V Brushless String Trimmer, model GST80321. It provides comprehensive instructions for the safe operation, assembly, and maintenance of the tool.
The Greenworks 80V Brushless String Trimmer is a cordless, battery-powered tool designed for trimming grass and light vegetation. Its primary function is to cut unwanted growth in lawns and gardens, offering a clean and precise finish. The brushless motor technology ensures efficient power delivery and extended tool life.
Usage Features:
The trimmer is equipped with several features to enhance usability and safety:
- High/Low Speed Button: This allows the user to adjust the cutting speed based on the grass condition. Two LEDs illuminate to indicate when the trimmer is in high-speed setting.
- ON/OFF Button: A dedicated button to power the unit on and off. The unit also features an automatic power-down function after 1 minute of idle time to conserve battery life.
- Lock-Out Button: Located on the handle above the switch trigger, this button must be depressed before the switch trigger can be pulled, reducing the risk of accidental starting. The lock resets each time the trigger is released.
- Switch Trigger: Controls the operation of the trimmer. Releasing the trigger stops the motor.
- Auxiliary Handle: Provides an additional gripping point for improved control and comfort during operation. It can be adjusted to an angle that allows for comfortable use with the rear handle.
- Guard: A protective shield designed to protect the user from flying debris during trimming.
- Coupler Device: Facilitates the connection of the straight shaft trimmer attachment to the power head. The attachment knob on the coupler needs to be loosened, and a release button on the attachment shaft must be pushed in to align and slide the two shafts together until the button locks into a positioning hole. The knob is then tightened securely.
- Adjustable Cutting Swath: The trimmer can be adjusted to a 14-inch or 16-inch cutting swath by rotating the cut-off blade. Setting the blade to 14 inches provides greater runtime, while 16 inches offers a larger cutting area.
- Shoulder Harness Attachment: The trimmer includes a harness holder, allowing for the attachment of a shoulder harness (not included) to distribute the tool's weight and reduce user fatigue.
- String Head: The string head uses a dual line spool assembly. Line can be installed by aligning slots on the spool cap and string head, inserting the line, pulling it through until equal on both sides, and then winding the spool cap clockwise. It is recommended to use 0.080-inch diameter line and not to exceed 15 feet of line at a time.
- Optimal Cutting Technique: The manual advises tilting the trimmer toward the area being cut for best results and cutting from right to left to avoid throwing debris at the operator. It also recommends using only the tip of the string for cutting and avoiding forcing the string head into uncut grass. Users are cautioned about increased string wear when cutting near wire fences, picket fences, stone, brick walls, curbs, and wood, and to avoid damaging trees, shrubs, and moldings.
Maintenance Features:
Proper maintenance is crucial for the longevity and safe operation of the string trimmer:
- Cleaning the Power Head: After use, the motor should be stopped, and the battery removed. The power head should be cleaned of dirt and debris using a damp cloth with a mild detergent. Users are warned against using strong detergents, aromatic oils (like pine and lemon), or solvents (like kerosene) on plastic parts, as these can cause damage.
- Storage: The string trimmer should be stored indoors in a dry, locked place, out of reach of children. It should be kept away from corrosive agents such as garden chemicals and de-icing salts. Storing the trimmer in sunlight, excessively warm places, or near a furnace is discouraged as it can shorten battery life.
- String Replacement: The trimmer is equipped with a line trimming cut-off blade on the guard. The string should be replaced when trimming efficiency diminishes to maintain optimal performance.
- General Maintenance: The manual emphasizes using only identical manufacturer's replacement parts for servicing to prevent hazards and product damage. Before any inspection, cleaning, or servicing, the motor must be shut off, all moving parts stopped, and the battery disconnected to prevent serious personal injury.
- Troubleshooting: A troubleshooting section is provided to help users diagnose and resolve common issues such as the motor failing to start, the trimmer stopping while cutting, or the line not advancing. Solutions include checking battery charge, ensuring battery security, clearing grass from the trimmer head, allowing the battery to cool, and replacing the trimmer line.
The manual also includes important safety instructions, symbols, and warnings, including Proposition 65 warnings regarding chemicals that may cause cancer or reproductive harm. It stresses the importance of wearing safety glasses or a full face shield during operation and keeping bystanders, children, and pets at least 50 feet away from the work area. The use of brush cutter attachments with this string trimmer is explicitly prohibited due to potential for serious injury or property damage.
To Next Page
General
