EasyManua.ls Logo

GreenWorks LMA125 - User Manual

GreenWorks LMA125
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P0801938-00
P0801938-00
GW 10A Mower
A
B
25142/25142AZ/25142WM
技术要求:
2.44P, 内容见电子档;
3.单色印刷,要求无色差、无污点;
4.骑马钉,裁切均匀、无连页;
5.以封样为准;
6.料件需符合格力博HSF文件(编号:GLB-CGR-146) 里关于环保和有害物质的具体要求。
1.材质要求:60g双胶纸
常州格力博集团
说明书
许乃鑫
蒋思聪
B
周艳
宋提提
李海平
20.03.24
版本号
描 复
日 期
工艺
审核
校对
设计
标记
处数
签名
日期
阶段标记
视角标记
重量 比例
批准
审定
标准化
日期
更改文件号
SCALE: A5
210mm
145mm

Questions and Answers

  • Q
    qyoungAug 10, 2025
    What to do if my GreenWorks Lawn Mower doesn't start?
    • P
      phillipsmatthewAug 10, 2025
      If your GreenWorks Lawn Mower doesn't start, there are several potential causes. First, ensure the extension cable is properly connected to both the outlet and the power supply, using a live 120V AC, 60 HZ AC receptacle. If the connections are secure and the mower still fails to start, the bail switch might be defective and require replacement.
  • R
    Roberto FullerAug 15, 2025
    Why does my GreenWorks LMA125 Lawn Mower stop during mowing?
    • D
      douglaslongAug 15, 2025
      Your GreenWorks Lawn Mower might stop during mowing for several reasons. The blade height could be too low, so try increasing it. Grass clippings might be attaching to the deck or the blade; in this case, disconnect the power supply and check the deck. It's also possible that the operating temperature of the machine is too high, so allow the machine to cool.
  • C
    Cynthia SnyderAug 20, 2025
    What to do if my GreenWorks Lawn Mower does not mulch correctly?
    • L
      lisavangAug 20, 2025
      If your GreenWorks Lawn Mower does not mulch correctly, it may be because wet grass clippings attach to the deck. Wait until the grass dries before mowing. Also, check to see if the mulch plug is missing and install it.
  • J
    Jasmine RamseyAug 25, 2025
    How to fix uneven cuts with my GreenWorks LMA125?
    • S
      Stephanie Reed MDAug 26, 2025
      If your GreenWorks Lawn Mower cuts grass unevenly, first examine the mowing area, as the lawn may be rough. Also, ensure the blade height is set correctly by moving the wheels to a higher position.
  • C
    Christine HowardAug 29, 2025
    Why is my GreenWorks LMA125 Lawn Mower hard to push?
    • C
      Chelsea RileyAug 29, 2025
      If your GreenWorks Lawn Mower is hard to push, it could be because the grass is too tall, or the blade height is too low; increase the blade height. Another possibility is that the grass catcher is full, and the blade drags in thick grass, so empty the grass clippings from the grass catcher.
  • A
    alexander48Sep 4, 2025
    Why is there a high vibration in my GreenWorks Lawn Mower?
    • S
      Stephen FreySep 4, 2025
      A high vibration in your GreenWorks Lawn Mower indicates that the blade is unbalanced or worn, and needs replacement. Another potential cause is a bent engine shaft. If you suspect this, stop the engine, disconnect the power supply, inspect for damage, and repair the machine before restarting.

GreenWorks LMA125 Specifications

General IconGeneral
BrandGreenWorks
ModelLMA125
CategoryLawn Mower
LanguageEnglish

Related product manuals