GREER Company MicroGuard RCI 510 User Manual

MICROGUARD RCI 510 TROUBLESHOOTING MANUAL 1 W450260D 03/10
Introduction
The Greer Company is dedicated to the design and manufacture of electronic parts created to aid in
crane operation and in the protection of crane operators and associated personnel. The following
manual has been developed to assist in helping Service Personnel to understand, locate, and identify
problems that may arise during the operation of the MicroGuard® RCI-510 Rated Capacity Limiter
System. Do not use this system in place of an operator who is knowledgeable in safety guidelines,
crane capacity information, and the crane manufacturer’s specications. Use of calibration routines
without consultation with the Greer Company invalidates the warranty.
Where to go For Help
When eld repairs cannot be made without replacement of a part, or when troubleshooting advice is
needed, one of the following support numbers should be called:
TEREX
Waverly, Iowa
Telephone:(319) 352-3920
FAX: (319) 352-9378
Greer Company
Service: Jenks, OK
Telephone:(918) 298-8300
FAX: (918) 298-8301
Information provided to support personnel must be accurate and complete. Have your crane Model
Number and Serial Number ready. Carefully describe the problem, noting any unusual System
responses that may help us to quickly and eectively solve your problem.

GREER Company MicroGuard RCI 510 Specifications

General

Brand	GREER Company
Model	MicroGuard RCI 510
Category	Industrial Equipment
Language	English