Operation manual SP 9 - Compact
CHAPTER I – INTRODUCTION – Page 2
For further consultations keep this Instruction near by at you work place.
The Instruction should be counted as the element of the machine and as accessory at the selling.
The information in this Instruction is up-to-date nevertheless definite changes can be performed.
The GRÉGOIRE-BESSON COMPANY has all rights to change the machine appearance and
characteristics without any advanced announcement or obligation even on already manufactured
machines or machines being on sale.
1.3. GRÉGOIRE-BESSON GUARANTEE
The general conditions for GRÉGOIRE-BESSON confirmation and guarantee can be found at the
dealer’s.
The guarantee is the part of GRÉGOIRE-BESSON service program which is given to such a client
who wants to use and maintain the equipment in the way which is shown in this Instruction.
The guarantee is not available for those who damage the equipment or perform such changes on
the machine which are not agreeable with the definition of the manufacturer.
The guarantee is not available for those who do not use the spare parts produced by GRÉGOIRE-
BESSON company.
1.4. IDENTIFICATION OF THE MACHINE
Write down into the rubrics the type/model of the machine, number of series and the date of the
purchasing. (the table on the pulling equipment).
Use this number when you want to order spare parts from the dealer. The service will be more
precise.
Date of purchasing : …………………………………………………………………
Model
:
…………
…………………………………………….…………
Number of series : …………………………………………………………………
Address and phone of the dealer : …………………………………………………….…………...
…
Do not take off the manufacturer table as well as CE signalization table fixed on the
machine.
To Next Page
Loading...