CHAPTER X - ADDITION OF THE SUPPLEMENTARY PLOUGH –- Page 1
10. ADDITION OF THE SUPPLEMENTARY PLOUGH
10.1. SAFETY DEVICES
This operation requires such protective equipment for supporting plough and plough
fastening, for lifting the supplementary plough bottoms as helmet, protective goggles
and gloves as well as safety shoes in good conditions.
Never let it be improvised if you
deal with this protecting equipment, connect with your
GRÉGOIRE-BESSON dealer.
The plough must be attached to the tractor normally.
10.2. ASSEMBLE THE SUPPLEMENTARY PLOUGH BOTTOM
1. Before starting the operation put the towing device to smooth ground.
2. Turn the plough side to horizontal position, stocks don’t touch the groun
d, keep 15 cm
distance beetwen ground and stocks.
3.
Stop the motor and apply the parking brake, get
out the starting key and put it to own
pocket.
4.
Dismount from beam the plate and the signal co
nsol.
5.
With lifting device put the plough bottom to beam, mount all 12 screws an
d fastening
them,connect it to plough correctly. Dismount from lifting device the plough bottom.
6. Pour le raccord de la sé
curité hydraulique : (option)
5.
After that put the whole last plough bottom together with the wheels behind t
he
supplementary plough bottom. Fasten well the b
o
lt 12.
6.
A hidraulika biztosítás (opció) csatlakoztatatásáho
z:
•
Csavarozza le a hidraulika kör szorítógyűrűjét az utolsó eket
esten.
•
Kapcsolja össze a hidraulika csatlako
zót.
IMPORTANT : The security hydraulic conne
ctions should be screwed to the end to have the
securities of the supplementary plough bottoms work properly. The ploughs union nut must
impact the suitable part of the connection base.
To Next Page
Loading...