EasyManua.ls Logo

Gregoire Besson SP9 COMPACT - Page 4

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation manual SP 9 - Compact
TABLE OF CONTENTS – 2. oldal
3.6. THE PRINCIPLE OF THE REVERSIBLE PLOUGH
3.6.1. Rack pinion of barring gear
3.7. THE MECHANISM OF THE WHEEL
3.8. WORKING SIDE
3.9. THE PRINCIPLE OF THE HYDRAULIC NON-STOP SECURITY (OPTIONAL)
3.9.1. The security cylinder diameter
3.9.2. Flow limitating pulley
3.9.3. Accumulators
3.10. KIT OF LIGHT AND SIGNALIZATION (OPTIONAL)
.4. PREPARATION OF THE TRACTOR FOR PULLING
4.1. NECESSARY TRACTION POWER
4.2. THE DISTANCE BETWEEN TRACTOR WHEELS
4.3. ADJUSTMENT OF THE STABILIZATION BARS AND FEELER WASHER
4.4. LEVERS OF THE LIFTING ARMS
4.5. THE LENGTH OF THE LIFTING LEVERS
4.6. THE LENGTH OF THE THIRD POINT
4.7. BALLASTING OF THE TRACTOR
5. ATTACHMENT AND DISENGAMENT OF THE PLOUGH
5.1. THE SECURE ATTACHMENT AND DISENGAGEMENT OF THE PLOUGH
5.2. THE PLOUGH ATTACHMENT TO THE TRACTOR
5.2.1. In the case if the tractor equipped with fixed ball axle-journal bottom lifting
levers
5.2.2. If the tractor is equipped with disengaging axle-journal of bottom lifting levers
(quick attachment):
5.2.3.
Disengage the traversing bolt !
5.2.3. The plough equipped with standard traversing
5.2.3. n the case of the plough with hydraulic Kit equipped on the traversing
5.2.4. Difficulties during the attachment
5.2.5. Connection of the third point
5.2.6. The attachment of the third point length
5.2.7. Positioning of the brake block
5.2.8. Arrester for the reverse equipment!
5.3. THE PLOUGH DISENGAGING
6. HYDRAULIC CONNECTIIONS
6.1. THINK ABOUT YOUR PROTECTION BEFORE STARTING TO WORK WITH PIPES
AND HYDRAULIC CIRCUITS.
6.2. BE ATTENTIVE WITH THE FLUID AND MATERIAL UNDER PRESSURE
6.3. PREPARATION OF HYDRAULIC CONNECTIONS
6.4. NECESSARY HYDRAULIC POWER
6.5. CONNECTION OF THE FLEXIBLE HYDRAULIC PIPES
6.5.1. Connect the flexible pipes logically
6.5.2. Verify the fixation of the flexible and rigid pipes!
6.5.3. Examination of the flexible pipes length
6.5.4. The examination of the hydraulic connection tightening of the supplementary
plough bottom
6.6. HYDRAULICS MOUNTED WITH THREE-FUNCTION SELECTOR