Operation manual SP 9 - Compact
CHAPTER IX – FIELD SETTINGS– Page 9
9.6.4. THE ADJUSTMENT OF <B> SHEAR PINS
In case of u
p sharing pins breasts:
Never stand in shearing area, keep safety distance when the plough operate.
The disengagment of secureing causing the shearing of two 16 mm diameter, 50 mm long pins in
same time.The disengaging load of pins at top of stock influence the temper of pins and the height of
plough.
PLOUGH
PINS VI3106+VJ324
Temper 8.8
PINS VI3107+VJ324
Temper 10.9
Height 1m 60
4800 kg 6000 kg
Height 1m 70
4500 kg 5700 kg
Height 1m 80
4200 kg 5300 kg
To make the change of pins easier we advised to take the plough to transport position. In this case
the parts are in horizontal position. It render, that the holes are in same level and the pins are
changeable without force.
9.6.5. THE ADJUSTMENT OF <S> SHEAR PINS (Optional)
The disengagement load is adjusted by manufacturer for avarage safety use. The load of pins
adjustable by srew (1).
For increase the load turn the srew (1) by 1 or 2 turning.
Grease the articulation points regulary (5 grease points).
Tha force on the top of brease is beetwen 1500 and 3000 kg.
To Next Page
Loading...