Operation manual SP 9 - Compact
CHAPTER XI - GREASING AND MAINTENANCE –- Page 5
11.2.10. NORMS OF SCREW FASTENING
The torque of the fastening depends on the screw diameter and its brand. The following
table will help to find the optimal effectiveness of the fastening.
The mark of the screws can be changed by a manufacturer
Rigid fastening torque on electroplated/anchored screws (general usage). 1 N x m = 0.1019 kg x m 1 kg x m = 9.81 N x m 1 N x m = 0.738 lb x ft 1 lb x ft =
1.355 N x m Only for information: the length of screws is measured under their head
To Next Page
Loading...