Handheld conductivity measuring device The product at a glance | 4
B-H87.0.01.DB2-1.0 9 / 28
4 The product at a glance
4.1 The G 1410
LCD Display G1410 G1410
4.2 Display elements
Display
Battery indicator Evaluation of the battery status
Unit display Display of units, if applicable, with unstable symbol
or type of mode, min/max/hold
Main display Measurement of the current conductivity value or
value for min/max/hold
Auxiliary display Corresponding temperature value for the value
shown in the main display. If applicable, alternating
with the temperature compensation.
NOTE
The unit display shows a rotating circle segment in the first position as long as the
measurement is unstable, if the position is unoccupied by the unit display.
4.3 Operating elements
On / Off button
Press briefly Switch on the product
Activate / deactivate lighting
Long press Switch off the product
Reject changes in a menu
Up / Down button
Press briefly Display of the min/max value
Change value of the selected parameter
Long press Reset the min/max value of the current measure-
ment
Both simultaneously Rotate display, overhead display
To Next Page
Loading...
Need help?
General
