Grindmaster CS1-110 - Item Part # Description SPRING WASHER M8

CS Espresso Machine Grindmaster
®®
19
Parts Diagram (continued)
Boiler Hydraulic Circuit CS3
Item Part # Descripon Item Part # Descripon
2 GROUP FILTER ST.STEEL D13.8*d10.5*11.5 32 SPRING WASHER M8
3 01323L NBR O RING 33 ELBOW BRASS 5/16*1/4
4 AUT. WATER REFILL REDUCTION 34 WATER LEVEL LOWER TUBE
6 HOT WATER OUTLET TUBE REAR 35 410-00495 HEX SCREW (M10*16)
7 SHAFT 36 01317L HEATING ELEMENT 6000W (CE)
8 BRASS CONNECTOR 37 01318L SI-GASKET ELEMENT
9 STEAM OUTLET TUBE FRONT LEFT 38 AUT.WATER REFILL TUBE REAR
10 01322L VALVE GASKET BRASS 39
WATER LEVEL UPPER TUBE
11 HOT WATER CONDUCT TUBE IN BOILER 40 BOILER
12 STEAM PRESSURE GAUGE TUBE 41
HEAT EXCHANGER OUTLET TUBE RIGHT
13 HEAT EXCHANGER RETURN TUBE MIDDLE 43 HEAT EXCHANGER OUTLET TUBE MIDDLE
14 HEAT EXCHANGER RETURN TUBE RIGHT 44 01319L ANTI-EDDY VALVE V.A.R.
15 AUT.WATER REFILL TUBE MIDDLE 45 HEAT EXCHANGER OUTLET TUBE LEFT
16 BRASS FITTING PS/1/4*PS1/4*L33.5 46 01321L VALVE GASKET BRASS
17 BRASS FITTING PS/1/4*PS1/4*L42 47 01320L LEVEL PROBE ASSEMBLY
18 01325L FLOWMETER DOSER 48 01371L SAFETY VALVE
19 FLOW METER GAUGE 49 BRASS CONNECTOR 1/4"X1/8"
20 ELBOW BRASS PT3/8*3/8 50 01324L
SOL. VALVE WATER REFILL ASSY 208~240V 60Hz
21 HEAT EXCHANGER INLET TUBE LEFT 51 LEVEL PROBE BASE
22 EXPANSION DRAIN TUBE 52 410-00502 PROBE FIXED SUPPORT
23 410-00492 S.C.N.R.DOSER VALVE 1/2*1/2*1/2 53 PROBE FIXED BOLT
24 BOILER DRAIN TUBE FRONT 54 410-00504 PROBE ( SUS304 /3mm L132 )
25 410-00493
PRESSURE RELEASE TAP BULK UNIT PS1/4xPS1/4
55 410-00496 BRASS NUT
26 HEAT EXCHANGER INLET TUBE MIDDLE 56 410-00497 TEFLON WASHER
27 FLOWMETER INLET TUBE 57 410-00498 SI O-RING
28 HEAT EXCHANGER RETURN TUBE LEFT 58 410-00499
BRASS CONNECTOR PT1/4*1/2-20UNF*1/2-20UNF
29 HEAT EXCHANGER INLET TUBE RIGHT 59 410-00500 ANTI-EDDY VALVE BASE
30 BOILER DRAINTUBE REAR WATER REFILL SET
31 NUT M8 STEAM OUTLET TUBE FRONT RIGHT