Griven GOBOCLIP MK3 User Manual

!"#$%"&'%&()*+,-%".%
/0.1+2)&34.,4$
!"#"$%&' ()*+,-./
56&789:&;<3=>?@A BC7D
789:&61EF&7B
BGF78F7:

Griven GOBOCLIP MK3 Specifications

General

Type	LED gobo projector
Light Source	LED
IP Rating	IP20
Beam Angle	15°
Pan Range	540°
Tilt Range	270°
Operating Voltage	100-240V AC, 50/60Hz
Weight	2 kg
Control	DMX512
Dimmer	0-100%
Effects	Rotating gobos

Summary

Packing Information

Safety Precautions

General Safety Warnings

Disconnect from mains before servicing. Max ambient temp 35°C. Housing can reach 90°C. Hot lamp caution.

Installation Guide

Fitting the Lamp

Instructions for fitting the lamp into the projector unit, with visual aids.

Mounting Position

Recommended clearances and positions for mounting the projector unit.

Electrical Connection

Details on connecting the projector to the power supply, including voltage and cable requirements.

Gobo Pattern Installation

Procedure for installing gobo patterns into the projector, including dimensions.

Optic Group Adjustment

Guide to adjusting the projector's optic group for different zoom ranges.

Projector Operation Modes

Master/Automatic Mode

Using the projector in master or automatic mode, controlling DIP switches for speed and sequence.

DMX/Slave Mode

Operating the projector in DMX or slave mode, setting up DIP switches for address and control.

DMX Cable Connection

Information on connecting the projector using DMX cables, including pinouts and shielding.

Maintenance Guidelines

Technical Specifications

Spare Parts Information

Recycling and Disposal Information